Product description and method of use:

A ：pet dog trainer electronic fence, remote control, multi-function use.

1. dog dog remote control distance of up to 250 meters

2. press the power button to start the product, the red power indicator light is long, the digital display is not bright, the function indicator green light is the dog training device mode.

3. independent "alarm", "vibration", and "electrostatic shock" three functions, button selection.

4. select the "alarm" function, press the corresponding function button, if you need to continue the alarm training function, press and hold the button until you do not need to exercise, you can let go.

5., select the "vibration" function, press the corresponding function button, if you need to continue the alarm training function, press and hold the button until you do not need to exercise, you can let go.

6. select the "static" function, can adjust the electrostatic strength through the electrostatic strength adjusting knob, the 0-100 file can be adjusted freely, can press the corresponding button function, if the need to continue to press the alarm function of training, do not need training until the keys can be loosely.

7. electrostatic strength adjustment will retain the last operation, such as when you spin the button to adjust to 50 stalls, shutdown, restart the product, the electrostatic strength remains 50 stalls, if you need to change the gear, direct adjustment knob can.

8. the use of dog trainer function, if only a dog training, dog trainer can direct the operation, if the operation training dog, dog trainer, they will be trained at the same time, synchronous receiving function signal, does not need to be trained dogs, the power to shut down its receiver.

Method for using outdoor electronic radio fence function:

Press the power button to start the product, the red power indicator light is long, and when the digital display lights up, it is the outdoor electronic wireless fence model

1, outdoor electronic wireless fence to transmitter as the center, the maximum remote control radius of 150 meters;

2, through the "+" and "-" regulation of signal strength, adjusted according to the free 001-100 file corresponding to the 15-150 receiver, the distance is 001 meters, 15 meters and 100 corresponding file, file corresponding to the 150 meters, the middle value can be adjusted. The signal intensity will be displayed on the screen.

3 electrostatic strength can be adjusted by electrostatic intensity knob, 0-100 files can be adjusted freely

4 after the dog exceeds the set range of activities, the receiver will automatically start the training function, and shake for about 3-5 seconds, then stop vibration, switch to static shocks for about 3-5 seconds, reminding the dog to return to the safe area. If the dog goes on, it will vibrate for about 3-5 seconds, static shock for about 3-5 seconds, and then the dog will feel the vibration warning and will not move on.

5, if the dog does not listen to the vibration warning or running too fast beyond the scope of the wireless fence can switch the transmitter, dog training mode of dog dog, return to the wireless range switching wireless electronic fence fence model

6, a transmitter can support multiple receivers to work simultaneously.

The 7. transmitter is full of electricity and can work continuously for about 20 hours

8. charging: DC5V, using the original charger is preferred.

Be careful：

1. when the transmitter is low, the power indicator light will slow down. During charging, the power indicator will flash quickly. After the power is fully charged, the power indicator will be on

2. power off, press it

Method of using a receiver:

1. press the "on / off" key, the indicator light flashes 2, then let go, and if you blink again and again, then let go, the function continues to be valid. When you turn on the machine, the signal is long. Shut down and press

2., the receiver adopts the power supply mode, after inserting the charging line, the signal lamp is shining, and when the electricity is full, the signal lamp is long.

3. if the receiver is stationary in 30 seconds, it will go into hibernation, and the receiver will be awakened, so that it can save power.

The 4.LED test lamp is used to test the electrostatic strength. The brighter the test light, the stronger the electric shock intensity.

5. receiver waterproof, rechargeable, practical good.

6. conductive column can be replaced, according to dog hair to choose a longer or shorter electric column.

Note: when the receiver is low, the signal blinks

Products include:

Control emitter *1

Receiver *1

Belt *1

Charger *1

Charging line *1

Test light *1

Electric column *4

English instruction *1