2 in 1 Electric Wireless Dog Fence and Remote Training Collar System 888 Waterproof and Rechargeable Collar With 3 Collar

Intelligent 2 in 1 Wireless Electric Pet Fence & Dog Training Collar

888-3 With 3 Collar

Smart 2 in 1 wireless pet fence is the newest product in market, design isvery novelty and combine training collar with wireless pet fence, it’s easy foroperating and mode switch.

It can be used on table or outside and it is effective to train pet developing goodhabits.

Characteristic:
1. 2 in 1 function；LED display, Wireless pet fence &Remote control (Beep+
Vibration + Shock )
2. LED display 5 levels signal fence distance(According to the environment, there
will be a gap of ± 16ft )
100 feet, 200 feet, 300 feet, 500 feet, 990 feet
3. Both transmitter and receiver are rechargeable. The receiver is waterproof and dustproof.
4. Reflective fluorescent TPU collar, improve the safety at night.
5. Use with silicone sleeve to prevent pets from directly touching the metal.

Wireless pet fence mode:
1. No Need pairing between transmitter and receiver，it can work directly after power on;
2. One transmitter can connect up to 5 receivers in fence mode.
Remote control dog training mode:
1. Pair the code：Can control 3 dogs same time, 1 for 1st dog, 2 for 2nd dog, 3 for 3rd dog. you can see the method in “How to pairing Transmitter and Receiver”，
2. 3 function: Sound, Vibration, Shock in training mode.
3. Vibration and shock feature has a 1-3 level. The lower number indicates weaker, the larger the number, the stronger the ntensity, please press “+” or “-” to adjust.

How to Test:
Before using please fully charged and use method of 1+2 below to confirm it
working or not (Shock test need use the LED Test Light Tool).
1. After Power on the Transmitter and Receiver, then power off the transmitter, the receiver will launch bi-bi-bi always.
2. In the training mode, press “Beep, Vibration or Shock” button to test.

Working Principle:
1. Receiver will not work among setting distance, will work as below when exceed the range.
2. When dog not in the range, Receiver working modes as below: 1--2--3(indicator light flashing)
1). Sound 5 seconds,; 2). Vibration 5 seconds; 3). Sound& vibration at same time for 6 seconds.
4). Shock 5 seconds; 5). Sound& Shock at same time for 6 seconds
3. After 5 working modes, it will launch di-di-di sound always. The receiver will not work
until the dog return to the setting distance range or press power Off.
4. After 5 minutes of static, it will enter standby mode.
5. After the second no signal 5 second delay work.

Function Operation:
1. When “100/200/300/500/990” displayed on screen, it is in wireless fence mode. press MODE button switch to dog training mode, in dog training mode, LED display “001”，“002” or “003” means for 1,2,3 dogs. Sound function display 1; vibration and shock function 1-2-3 Level can adjust different strengths.
2. In dog training mode can remote control 3 dogs at same time, press ‘+’ or ‘-’button to change control which dog. There are 3 functions on the right of the panel: sound, vibration, shock.

Wireless fence using guide:
1. Support 5 dogs in maximum, the biggest straight line radius is 990ft, wireless fence and as center of the transmitter.
2. When dog exceed the setting range, receiver will start working mode
automatically. (refer to the working modes at “Working Principle” ).
3. Please keep the Transmitter always power on, if not, After 2 cycles of working modes,
it will launch di-di-di sound always.

Dog training using guide:
1. The biggest straight line distance is about 990ft for dog training collar.
2. 3 dogs can be remote controlled mean while, LED display “001”Means the first
dog, “002”for the second dog,“003”for the third dog，
3. Independent “sound”，“vibration”，and“shock”3 function for options. The vibration and shock functions have 1-3 Level djustments, and press “+” “-” to adjust. Vibration” and “Electric Shock” The greater the number, the stronger the intensity.

How to pairing Transmitter and Receiver
1. Fully charge and power on;
2. Press "+" or "-" to choice paring which Receiver (001,002 or 003) ;
3. Press transmitter panel “MODE” button for 3 seconds until the LED flashing,
then press the receiver power button for 3 seconds, after pairing successfully,
LED and receiver indicator light will be on always.
4. Use test method to test is connected or not ; (please see “How to Test”)

Receiver using guide
1. Receiver is water proof and rechargeable, the metal probes can be replaced according to dog’s hair length. Receiver static for 5 minutes, to sleep. Touch or move the receiver , it will be awakened.
2. Press power button 1 second, receive will be turned on, power light will be on
always, Press power button gently, receiver will be turned off.
3. LED testing light used for testing shocking, testing light on means shockingfunction is working.
can be used as wrench to fix metal probes.

Charging:
1. Transmitter is rechargeable with DC 5V, 2500mah lithium battery, LED will display 000 flashing When low battery, please charge in time, usually 4-5 hours for full charge.After full charge, the red light will be on always, please use the original charger.
2. Receiver is rechargeable with 5V 400mah lithium battery, taking 2-3 hours forfull charge and then be used for about 500 times. Receiver 5V low batteryreminder: indicator light flashing, please charge in time, after fully charged, the green light will be on.

Low battery alert:
Indicating red light flashing, please charge in time.

Attention:
It will affect distance and using when low power.
Emitters should be placed outdoors to avoid affecting the distance, low power will affect the use of distance
Please keep the Transmitter always power on, if not, the receiver will go to working mode, shock your dogs two times, and bi-bi-bi always.
The original packaging has been paired at the factory. If you purchase additional collars, the dog training equipment must be paired before use.